• Two-piece upper diaphragm and lower seat assembly maximizes flow through valve and protects diaphragm from harmful debris
• Normally Open design allows for constant system pressurization and on-demand access to manual irrigation and quick coupler use
• Dirty water protection is afforded by the removable filter and metering rod assembly plus the added benefit of non-continuous flow through the solenoid
• All EPDM rubber parts outlast commonly used Buna-N parts when exposed to reclaimed water
• Includes “No Minimum Flow Requirement” capability, which ensures reliable opening and closing of the valve in extreme high or low flow scenarios (as low as 1 gallon per hour)

Solenoid Specifications

Standard 24 VAC
   In-rush current: 0.45 A (10.8 VA)
   Holding current: 0.30 A (7.2 VA)

Optional 110 VAC
   In-rush current: 95 mA (10.5 VA)
   Holding current: 65 mA (7.2 VA)


Operating Ranges

   Flow: 0-360 gpm
   Pressure: 20-200 psi